Do you want to ride your bikes in mountain area? Don’t you know how to be a mountain biker? Don’t worry! You are in right place. After reading our article you will be able to know details about mountain biking. Keep reading…
There is something about grabbing your mountain bikes under 300 dollars and heading out onto a trail. You don’t have to be a pro to get into mountain biking. However, you also cannot just jump onto your bicycle and partake into this sport immediately.
Mountain biking requires a combination of endurance, strength, and skill. If you want to get the combination right, you’ll need to train – hard. This sport requires some different skills than road cycling. Here, we have compiled a list of basic techniques to help you become a mountain biker . We have also compiled a list of our top 5 favorite mountain trails across America. Let’s take a look.
How to be a Mountain biker
To become a successful mountain biker, it’s primal to have a right body position. Mountain bike trail surfaces are rough as surfaces include rocks, mud, sand, soil, roots and much more. These terrains and potential obstacles can be unnerving to beginners. You’ll need to be in the right body position in order to get through these tricky trail surfaces.
There are two main body positions: neutral and ready.
Neutral Position: this position will allow a cyclist to keep pedaling along comfortably while still allowing them to easily transition into a ready position for technical and rougher terrain. Neutral position entails:
- A slight bend in knees and elbows
- Index fingers always on brake levers
- Level pedals that are evenly weighted
- Eyes looking straight ahead – look where you want to go, not where you don’t.
Ready Position: It’s time to move into ready position when trail gets rockier and steeper. This position enables a rider to get physically and mentally prepared to tackle rougher terrain. Ready (or attack) position entails:
- Evenly weighted level pedals
- Rear end off the seat and hips shifted back
- A deep bend in knees and elbows
- Back flat and nearly parallel to the ground
- Index fingers on brake levers at all times
- Eyes looking straight forward to where you want to go and not where you don’t
Using your brakes requires using your best judgment regarding how much or how little to squeeze those brake levers.
NOTE: The more weight a tire carries the more braking power it has.
When going downhill, front wheel tends to carry more weight than the rear wheel. Braking with front brake helps keep a rider in control without them going into a total skid. Always be mindful of how much pressure used to squeeze your lever because when overdone, you might accidentally toss yourself over the handlebars.
When descending, shift body’s weight back over rear wheel as it’ll increase rear braking power. This will balance the power of both brakes (front and rear) and give a rider maximum control. In due time, a beginner biker will learn how much of weight to shift over every single wheel and how to apply just enough braking power to each brake in order to avoid the risk of skidding down a trail.
Adjust Seat Position
Positioning a seat properly will help an individual set their body weight appropriately for climbing and descending mountain trails.
Climbing: For climbing, adjust the seat for maximum efficiency. Adjust it to high levels – this will help you pedal efficiently and powerfully using all major leg muscles.
Descending: Drop your seat about two or three inches from the height you’d set for climbing. A lowered seat lowers your center of gravity giving an individual better control needed to tackle steep descents.
Stay seated: Most beginners tend to stand out of their saddle as they do when on a road bike. This is a mistake when it comes to mountain biking. Standing while climbing over steep hills with a mountain bicycle may cause your rear tire to lose its grip and spin out. Climbing hills require traction so do stay seated for as long as you can.
Lean forward: Leaning forward adds more weight to the front wheel and will help keep a person grounded.
Keep pedaling: On rocky climbs, keep the pressure on and do not let up on pedals. The slower a person goes through rough trail sections, the larder they will have to work.
Relax: Stay loose on the bicycle and do not clench your grip. Steer with your body, allowing your shoulders to guide you through each turn and over any obstacles
Rise above saddle: When racing down a bumpy trail, rise above the saddle. This will allow your legs and knees to absorb rocky and bumpy grounds instead of your rear.
Top 5 Mountain Bikes Trails In The USA
1. Moab, Utah
2. Doctor Park, Almont, Colorado
3. McKenzie River Trail, Bend, Oregon
4. Rock Lake Epic, CAMBA Trails, Cable, Wisconsin
5. South Boundary, Taos, New Mexico
Cruising around on your bike has to be one of the most exhilarating experiences one can experience. The feel of wind on your hair, feeling your muscles tense as you ride over those steep hills, cruising down a hill at great speeds, or even climbing that mountain you have always wanted to conquer. There is no better way to get a feel of a country than by bike. Biking makes you feel one with nature and provides you with fun and thrilling ways of getting from one place to another. Have you ever been on any of these mountain-trails before? What was your experience? We would love to hear from you so do share your adventure with us.
You can read our other resource post